Code: HI1-2030

SUPER SAE 60

Product Code: HI1-2030

Product Benefits

  • Longer Engine Life
  • Black Sludge Beaten
  • High Temperature Performance
  • Rust & Corrosion

 

Hi-Tec Premier Super 60 SAE 25W/60 meets:

  • API: SG/CD
  • FORD M2C 153E (D & C), GM 6085M, 6048M

 

In Stock

Description

Hi-Tec Super 60 (SAE 25W/60) is a very specialised engine oil for all naturally aspirated and turbocharged four stroke gasoline passenger car and motorcycle engines. It meets and exceeds the API Service Classifications SG/CD. It gives vastly improved protection against engine wear, high temperature oxidation deposits and sludge formation as well as protection against low temperature “black sludge” development.
CHARACTERISTICS
LONGER ENGINE LIFE. Hi-Tec Super 60 provides increased engine life since the minimal wear rates associated with quality SF engine oil are decreased by at least 30%. Newly developed anti-wear additives minimise wear under all service conditions to rings, cylinders, bearings, timing gear, valve train and all moving engine surfaces.
BLACK SLUDGE BEATEN. The increased levels of powerful dispersants and detergents of Hi-Tec Super 60 maintain clean engines under all service conditions. The special active ashless dispersants inhibit formation of Black Sludge especially under the constant cold temperature operation of urban motoring which is a major cause of this harmful sludge. Engine passages are kept clean to ensure full-bodied lubricant reaches every critical engine component requiring lubrication.
HIGH TEMPERATURE PERFORMANCE is enhanced by the careful selection of thermally stable base oils, oxidation inhibitors and detergents. High temperature deposits and lacquers associated with oxidation and nitration (which occurs in lean burn fuelled engines) are avoided so that peak engine performance is always available under the extremes of sustained high speed highway motoring. Viscosity thickening is a parameter of oxidation. Hi-Tec Super 60 contributes to less oxidation and more protection from piston deposits compared to conventional SF engine oils (when tested in the ASTM Sequence IIIE engine).
RUST & CORROSION. Protection by high levels of alkali reserve additives neutralises those acidic corrosive combustion products which have been scavenged past the rings. Rust inhibitors overcome the rust inducing condensation tendencies in cooling engines after engine shut-down.

Additional information

Product Name

HI-TEC SUPER 60 SAE 25W/60 PREMIUM MINERAL ENGINE OIL

Manufacturer's Product Code

HI1-2030

Use

Mineral Oil for 4 Stroke engines

Chemical Characteristics

Density, kg/Lt at 15oC D.1298 0.898, Viscosity, cSt at 100oC D.445 26 at 40oC D.445 298, Viscosity Index D.2270 115, Pour Point, oC D.97 -24, Flash Point, COC, oC D.92 223, Total Base Number D.2896 5.3, Sulphated Ash, % Mass D.874 0.86, Phosphorus, % Mass D.1091 0.07, Zinc, % Mass A/A 0.08, Magnesium, % Mass A/A 0.10, Nitrogen, % Mass A/A 0.05, Foaming Characteristics – All Sequences, 10 Min Settling D.892 Pass, Rust Prevention Characteristics D.665 Pass

size

200lt, 20lt, 5lt

Reviews

There are no reviews yet.

Be the first to review “SUPER SAE 60”

Your email address will not be published. Required fields are marked *